Description
Transducer T and TM Series is best suited to the following applications:
- Heating (wall heaters)
- Air conditioning systems
- Boiler systems (steam)
- Industrial applications
- Water treatment
Costruction Features
| Plastic Casing | Polyarylamide Solvay (also available as IEC 60695-2-12 GWFI approved materials) |
| Membrane | AISI |
| Seal | EPDM; VITON; SILICONE; NBR |
| Sensor | Linear programming |
| Connector | RAST 2,5 (AMP duoplug type) |
| Protection Class | IP 00 |
| Weight | ∼ 23 gr. |
Operational Features
| Operating Range | - 0÷4 bar / - 0÷6 bar / - 0÷10 bar |
| Overload Pressure | ≤ 15 bar |
| Breakdown Pressure | > 20 bar |
| Fluid Temperature | ≤ 110°C |
| Environmental Temperature | ∼ 20°C÷85°C |
| Fluid | Liquid, gas, or water containing the usual concentrations and additives for heating circuits and glycols. |
| Manometer | Display 0-3 bar (only TM serie) |
Eletrical Features
| Supply | 5 Vdc; 8...30 Vdc |
| Output Signal (Custom output) | 0.5...2.5Vdc |
| 0.5...3.5Vdc | |
| 0...3Vdc | |
| 0...4Vdc | |
| 0...4,5Vdc | |
| Current absorption | < 9mA |
| Resistance Load | ≥ 4,7 KΩ |
| Capacitance Load | ≤ 10nF |
Electric Connections
Coding
Coding
Approvals
-
EMC 2014/30EU
-
All our products conform to the 2002/95/EC European directive RoHS and REACH.
Storage
-
Avoid the transducer coming into contact with powders.
-
Do not store in locations with humidity condensation.
-
Storage temperature -25°C.
