ELECTRONIC VACUUM – “VE” SERIES
Description
The VE series transducers find their optimal use in the following applications:
- Filtration
- Packaging
- Pneumatics
- Medical
- Vacuum handling systems
- Industrial application
Consisting of a Hall sensor, the development of this transducer is based on the concept of the solicitation of a semiconductor by means of a magnet.
It is made of reinforced technopolymer in such a way as to withstand mechanical stresses and high thermodynamic conditions.
The use of ultrasonic welding technology makes the coupling of the components making up the product homogeneous and stable over time, avoiding metal joints or rivets.
Operational features
Operating range | 0 ÷ -1000 mbar |
Overload pressure | ≤ 10 bar |
Breakdown pressure | > 20 bar |
Fluid temperature | ≤ 80°C; ≤ 110°C (termal shock max. 3 minutes) |
Ambient temperature | ≤ 90°C |
Fluid | Liquid, gas |
Electrical features
Supply | 5 Vdc (±3%); 8-30 Vdc |
Output signal | 0 ÷ 1.000 mbar |
0,5...4 Vdc (Customization feasible on request) | |
Electrical absorption | <12mA |
Resistance load | ≥1 KΩ |
Capacitance load | 100 nF |
Construction features
Plastic casing | Polyarylamide (alsoavalilable as IEC 60695-2-12 GWFI approved materials) |
Sensitive component | AISI |
Seal | EPDM; NBR; FPM; SILICONE |
Sensor | Programmable |
Connector | RAST 2,5 (AMP duoplug type) |
Protection degree | IP00 |
Weight | 22 gr. |
Approvals
- EN61000-4-2, EN61000-4-3, EN61000-4-4
-
All our products conform to the 2002/95/EC European directive (RoHS)